Copyright © 2011-2021 Battery Chem is a trademark of A to Z Global Marketing Inc. All Rights Reserved
AUTOMOTIVE BATTERY SULFATION
REMOVAL CHEMICAL
Rejuvenate your BATTERY
Tune up your BATTERY
Protect your BATTERY from Sulfation
TM
FOR A FREE COPY OF OUR BATTERY CHEM™ MANUAL FOR TESTING & REJUVENATING
AUTOMOTIVE BATTERIES, E-MAIL US AT BATTERYCHEM@AOL.COM
Disclaimer: READ THE MANUAL. There are no guarantees that every battery will respond to the chemical treatment.
Battery Chem™ will not work with shorted, or totally worn out batteries.
"Our success rate as reported by users is approximately 70% of properly tested and prepared batteries, and by using Battery Chem™ the users automatically release the
manufacturers and distributors of Battery Chem™ from any and all liabilities including any injuries suffered from improper use of the product, or use by untrained persons,
or personnel."
TELEPHONE: 401-725-8141 MON-FRI 8AM-5PM EST E-MAIL: batterychem@aol.com
NEW! PORTABLE WATER DEIONIZERS
Deionized water, like distilled water is ideal for lead acid battery use. Tap water should never be used as it shortens the battery life
considerably. Our units produce laboratory grade deionized water used in everything from auto detailing, manufacturing to
kidney dialysis. Deionization is a method used by laboratories to produce purified water
Our units produce laboratory grade deionized water used in everything from auto detailing,
manufacturing to kidney dialysis. Deionization is a method used by laboratories to produce
purified water.
The pure definition: "Removal of Ions".
The term is generally used with respect to the removal of ions from water. Deionization is
commonly achieved by passing the water through successive ion exchange columns. In one
column, ions are exchanged for H+ ions. In another column, anions are exchanged for OH-
ions. Following a reaction of H+ with OH- ions, no ions remain in solution.
It is produced through ion exchange. Simply said, water flows over porous beads that are
positively and negatively charged and the minerals or total dissolved solids are removed. These
ion exchange columns are porous beads called exchange resins.
Mixed Bed Deionizer Standard Model
Compact and lightweight at only 18 pounds, this deionizer measures 6 ¾" in diameter by 22" in height.
The unit contains ¼ cubic feet of high grade virgin mixed bed resin. This unit is easy to hook up or
remove depending on your application. Works great in the garage, laboratory, on the road or anywhere
you need deionized (DI) water. Unit comes complete with the deionizer, 4' high pressure hose, hand-
held TDS (Total Dissolved Solids) meter, shut-off valve, and a cap/plug for the inlet/outlet.
Part Number:
OTG2-SDI
Design:
Mixed Bed System
Size:
22" x 6.75"
Weight:
18 lbs
Capacity:
0.25 cubic feet
Tank:
Single
Capability:
250 PPM = 180 gallons
Warranty:
1 Year Limited Warranty
Meter:
Portable TDS Hand-held Meter
FlowRate:
Less than 2 gallons/minute for best performance & effectiveness
Dual Bed Deionizer Standard Model
The unit is made up of dual tanks using two difference premium resin products. The
first tank in the series contains ¼ cubic feet of cation resin and the second tank
contains ¼ cubic feet of anion resin. When running these tanks in series you produce
approximately 2 ½ times more water and will reduce your operating cost by 50%
compared to the single tank mixed bed deionizer. The dual tank will save you money
and give you a great return on your investment. The dual tank model comes with all
the necessary fittings including a polypropylene cam lever for easy hook-up and only
needs a 10" by 20" compact area. Unit weighs a mere 36 pounds. Unit comes complete
with the deionizers, 4' high pressure hose, hand-held TDS (Total Dissolved Solids)
meter, shut-off valve, and a cap/plug for the inlet/outlet.
Part Number:
OTG2-DDI
Design:
Dual Bed System
Size:
22" x 6.75" each
Weight:
18 lbs each
Capacity:
0.25 cubic feet
Tank: Dual Tank
Capability:
250 PPM = 460 gallons
Warranty:
1 Year Limited Warranty
Meter:
Portable TDS Hand-held Meter
FlowRate:
Less than 2 gallons/minute for best performance & effectiveness
Connector:
Polypropylene Cam Lever
Capability of Models
CAPACITY:
The effectiveness of the DI process is determined by measuring the resistivity/conductivity of the deionized water, many times measured in parts per million (PPM).
Water quality from deionizers varies with the type of resin, feed water quality, flow, efficiency of regeneration, remaining capacity, temperature, etc.
The TDS* (Total Dissolved Solids) of the water source will help to determine local capacity of your unit and output of our deionizer to indicate when change-out is
necessary can be done easily with our simple to use meter provided. The TDS can range from zero to 1000 PPM. The frequency for refilling is dependent upon the
TDS of the water source, flow rate and the gallons used per application.
*Total Dissolved Solids (TDS) are the total amount of mobile charged ions, including minerals, salts or metals dissolved in a given volume of water, expressed in units
of mg per unit volume of water (mg/L), also referred to as parts per million (ppm). TDS is directly related to the purity of water and the quality of water purification
systems and affects everything that consumes, lives in, or uses water, whether organic or inorganic, whether for better or for worse.
Model:
Standard
Standard
Part#
#OTG2- SDI
# OTG2-DDI
Design:
Mixed Bed
Dual Bed
Capacity:
0.25 CU FT
0.25 CU FT
TDS Level (PPM)
Gallons
Gallons
100
450
1,150
200
235
600
250
180
460
300
160
400
400
115
290
Warranty and quality performance is the best in industry! Again, our units produce laboratory grade deionized water used in everything from auto detailing, manufacturing
to kidney dialysis. Our deionization systems use only a premium grade virgin exchange resin. Our systems use high quality exchange resin from the leading supplier of
specialty resins for ion exchange, catalyst, absorbents and specialty applications markets worldwide. It would be very difficult for any manufacturer to provide rock-solid
numbers for resistivity, conductivity and the associated parts-per-million without a water analysis being completed. All of our systems are produced using high grade
polyglass tanks, design with wide mouth cap for easy refill, includes rugged construction and are adaptable for either hose or pipe thread connections.
$409.99 + FREE SHIPPING FOR CONTINENTAL USA (THE
LOWER 48 STATES) ONLY.
EVERYONE ELSE PLEASE CONTACT US FOR SHIPPING QUOTE
NO DELIVERIES TO P.O. BOXES! WE NEED A STREET ADDRESS TO DELIVER TO
PLEASE INCLUDE YOUR PHONE NUMBER; WE CANNOT SHIP WITHOUT IT!
Customers NOT IN CONTINENTAL USA, please contact us for shipping quote first
MAKE CHECKS / M.O. PAYABLE TO: A to Z Global Marketing Inc.
CHECK PAYMENTS ARE HELD 10 DAYS TO CLEAR.
Mail To:
A to Z Global Marketing Inc.
34 Mount Avenue
Lincoln, RI 02865
CREDIT CARD ORDERS CAN BE TAKEN OVER THE TELEPHONE.
DIAL 401-725-8141 MON.-FRI. 8AM-5PM EASTERN TIME.
$239.99 + FREE SHIPPING FOR CONTINENTAL USA (THE
LOWER 48 STATES) ONLY.
EVERYONE ELSE PLEASE CONTACT US FOR SHIPPING QUOTE
Copyright © 2011-2021 Battery Chem is a trademark of A to Z Global Marketing Inc. All Rights Reserved
AUTOMOTIVE BATTERY SULFATION REMOVAL CHEMICAL
Rejuvenate your BATTERY Tune up your BATTERY
Protect your BATTERY from Sulfation
TM
PHONE: 401-725-8141 MON-FRI 8AM-5PM EST
E-MAIL: batterychem@aol.com
FOR A FREE COPY OF OUR BATTERY CHEM™ MANUAL FOR
TESTING & REJUVENATING AUTOMOTIVE BATTERIES,
E-MAIL US AT BATTERYCHEM@AOL.COM
Disclaimer: READ THE MANUAL. There are no guarantees that every battery will
respond to the chemical treatment.
Battery Chem™ will not work with shorted, or totally worn out batteries.
"Our success rate as reported by users is approximately 70% of properly tested and
prepared batteries, and by using Battery Chem™ the users automatically release
the manufacturers and distributors of Battery Chem™ from any and all liabilities
including any injuries suffered from improper use of the product, or use by
untrained persons, or personnel."
NEW! PORTABLE WATER
DEIONIZERS
Deionized water, like distilled water is ideal for lead acid
battery use. Tap water should never be used as it shortens
the battery life considerably. Our units produce laboratory
grade deionized water used in everything from auto
detailing, manufacturing to kidney dialysis. Deionization is
a method used by laboratories to produce purified water
Our units produce laboratory grade deionized water used in everything
from auto detailing, manufacturing to kidney dialysis. Deionization is a
method used by laboratories to produce purified water.
The pure definition: "Removal of Ions".
The term is generally used with respect to the removal of ions from water.
Deionization is commonly achieved by passing the water through
successive ion exchange columns. In one column, ions are exchanged for
H+ ions. In another column, anions are exchanged for OH- ions. Following
a reaction of H+ with OH- ions, no ions remain in solution.
It is produced through ion exchange. Simply said, water flows over porous
beads that are positively and negatively charged and the minerals or total
dissolved solids are removed. These ion exchange columns are porous
beads called exchange resins.
Mixed Bed Deionizer Standard Model
Compact and lightweight at only 18 pounds, this deionizer
measures 6 ¾" in diameter by 22" in height. The unit contains ¼
cubic feet of high grade virgin mixed bed resin. This unit is easy
to hook up or remove depending on your application. Works
great in the garage, laboratory, on the road or anywhere
you need deionized (DI) water. Unit comes complete with
the deionizer, 4' high pressure hose, hand-held TDS (Total
Dissolved Solids) meter, shut-off valve, and a cap/plug for
the inlet/outlet.
Part Number:
OTG2-SDI
Design:
Mixed Bed System
Size:
22" x 6.75"
Weight:
18 lbs
Capacity:
0.25 cubic feet
Tank:
Single
Capability:
250 PPM = 180 gallons
Warranty:
1 Year Limited Warranty
Meter:
Portable TDS Hand-held Meter
FlowRate:
Less than 2 gallons/minute for best
performance & effectiveness
$239.99 + FREE SHIPPING FOR CONTINENTAL USA (THE
LOWER 48 STATES) ONLY.
EVERYONE ELSE PLEASE CONTACT US FOR SHIPPING QUOTE
Dual Bed Deionizer Standard Model
The unit is made up of dual tanks using two difference
premium resin products. The first tank in the series
contains ¼ cubic feet of cation resin and the second
tank contains ¼ cubic feet of anion resin. When
running these tanks in series you produce
approximately 2 ½ times more water and will reduce
your operating cost by 50% compared to the single
tank mixed bed deionizer. The dual tank will save you
money and give you a great return on your
investment. The dual tank model comes with all the necessary fittings
including a polypropylene cam lever for easy hook-up and only needs a 10"
by 20" compact area. Unit weighs a mere 36 pounds. Unit comes complete
with the deionizers, 4' high pressure hose, hand-held TDS (Total Dissolved
Solids) meter, shut-off valve, and a cap/plug for the inlet/outlet.
Part Number:
OTG2-DDI
Design:
Dual Bed System
Size:
22" x 6.75" each
Weight:
18 lbs each
Capacity:
0.25 cubic feet
Tank: Dual Tank
Capability:
250 PPM = 460 gallons
Warranty:
1 Year Limited Warranty
Meter:
Portable TDS Hand-held Meter
FlowRate:
Less than 2 gallons/minute for best performance
& effectiveness
Connector:
Polypropylene Cam Lever
$409.99 + FREE SHIPPING FOR CONTINENTAL USA (THE
LOWER 48 STATES) ONLY.
EVERYONE ELSE PLEASE CONTACT US FOR SHIPPING QUOTE
Capability of Models
CAPACITY:
The effectiveness of the DI process is determined by measuring the
resistivity/conductivity of the deionized water, many times measured in parts
per million (PPM). Water quality from deionizers varies with the type of
resin, feed water quality, flow, efficiency of regeneration, remaining capacity,
temperature, etc.
The TDS* (Total Dissolved Solids) of the water source will help to
determine local capacity of your unit and output of our deionizer to
indicate when change-out is necessary can be done easily with our simple
to use meter provided. The TDS can range from zero to 1000 PPM. The
frequency for refilling is dependent upon the TDS of the water source, flow
rate and the gallons used per application.
*Total Dissolved Solids (TDS) are the total amount of mobile charged ions,
including minerals, salts or metals dissolved in a given volume of water,
expressed in units of mg per unit volume of water (mg/L), also referred to
as parts per million (ppm). TDS is directly related to the purity of water and
the quality of water purification systems and affects everything that
consumes, lives in, or uses water, whether organic or inorganic, whether for
better or for worse.
Model:
Standard
Standard
Part#
#OTG2- SDI
# OTG2-DDI
Design:
Mixed Bed
Dual Bed
Capacity:
0.25 CU FT
0.25 CU FT
TDS Level (PPM)
Gallons
Gallons
100
450
1,150
200
235
600
250
180
460
300
160
400
400
115
290
Warranty and quality performance is the best in industry! Again, our units
produce laboratory grade deionized water used in everything from auto
detailing, manufacturing to kidney dialysis. Our deionization systems use only a
premium grade virgin exchange resin. Our systems use high quality exchange
resin from the leading supplier of specialty resins for ion exchange, catalyst,
absorbents and specialty applications markets worldwide. It would be very
difficult for any manufacturer to provide rock-solid numbers for resistivity,
conductivity and the associated parts-per-million without a water analysis being
completed. All of our systems are produced using high grade polyglass tanks,
design with wide mouth cap for easy refill, includes rugged construction and
are adaptable for either hose or pipe thread connections.
NO DELIVERIES TO P.O. BOXES! WE NEED A STREET ADDRESS TO DELIVER TO
PLEASE INCLUDE YOUR PHONE NUMBER; WE CANNOT SHIP WITHOUT IT!
Customers NOT IN CONTINENTAL USA, please contact us for shipping quote first
MAKE CHECKS / M.O. PAYABLE TO: A to Z Global Marketing Inc.
CHECK PAYMENTS ARE HELD 10 DAYS TO CLEAR.
Mail To:
A to Z Global Marketing Inc.
34 Mount Avenue
Lincoln, RI 02865
CREDIT CARD ORDERS CAN BE TAKEN OVER THE TELEPHONE.
DIAL 401-725-8141 MON.-FRI. 8AM-5PM EASTERN TIME.
